The all new 2022 Cannondale Scalpel HT is an XC hardtail with modern geometry

0


[ad_1]

Cannondale introduced the Scalpel HT hardtail in its Scalpel cross-country line of mountain bikes, previously consisting only of full suspension models.

The latest addition to the lineup follows in the footsteps of its full-suspension sibling, the 2021 Cannondale Scalpel, with a flexible, trail-focused mountain bike geometry.

The numbers are illustrated by a 65.5 degree head tube angle and proportional chainstay lengths that increase by 5mm for each size of Scalpel HT.

It also has a new low shroud design, meant to make the ride smoother, and similar to the brand’s SAVE micro-suspension seen on the Cannondale F-Si, the model this bike will replace.

Unsurprisingly, the Scalpel HT is built around 29-inch front and rear wheels, but now gets 100mm to 110mm of travel on the front wheels depending on the model.

Cannondale launched the Scalpel HT for 2022.
Cannondale

The Scalpel HT 2022 will be available in four configurations.

The more expensive Scalpel HT Hi-MOD 1 gets the brand’s lightest carbon material, with a claimed frame weight of 895g, has Shimano’s XTR M9100 mountain bike groupset and costs £ 6,200 / 5 $ 000 / € 6,999.

The cheapest version, the Scalpel HT Carbon 4, sells for £ 2,600 / $ 2,200 / € 2,499, and is decked out with Shimano Deore M6100.

2022 Cannondale Scalpel HT Frame Details & Specs

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

With clean lines front to back, the frame is certainly attractive.
Cannondale

The 2022 Scalpel HT was designed with an emphasis on low weight and Cannondale claims the flagship frame weighs 895g. This is the mid-size Hi-MOD version, painted in the lightest black color, without axle, seat clamp, helmet, etc.

The lack of weight is impressive and should appeal to the motorcycle target audience; runners looking to get on the race podium or go up (repeatedly) uphill.

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

The Hi-MOD version of the frame weighs 895g.
Cannondale

Internal gear cables use a full-length outer cable as standard, as is typically the case on internally routed bikes, but can also be modified to use interrupted cables to further reduce weight.

Any weight savings would be minimal, but by the end of the XC races some additional gains could add up. This feature might appeal to riders looking to reduce their weight to the extreme and don’t mind having to change the gear cables regularly.

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

The frame has cables routed inside.
Cannondale

While press material doesn’t mention Cannondale’s SAVE micro-suspension seen, on the old Scalpel, by name, the new model has “sculpted flex zones” in the chainstays, paired with lowered seat stays to ensure the conformity of the rear on the cattery ground.

I tested the Cannondale Trail SE 4, which ditched the shrouds similar to the new Scalpel HT, and noticed how great it felt on the trails. Hopefully, the Scalpel has inherited some of the calm inherent in this model.

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

The rear has built-in flex zones to improve comfort and compliance.
Cannondale

Elsewhere, Hi-MOD and standard carbon frames share the same standard PF30-83 bottom bracket shell and tapered head tube. They are both fitted with SRAM’s UDH and use a 55mm chainline.

The frame is also dropper post compatible, with cable routing options, but none of the stock models come with a dropper post from the factory.

Cannondale Scalpel HT 2022 Wheel Sensor

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

The wheel sensor is produced in collaboration with Garmin.

The front wheel is equipped with a sensor that connects to the Cannondale smartphone app to provide information such as current speed, route and distance traveled, in addition to registering your bike and reminding you when it needs to be repaired, among other features.

Although the exact specifications of the sensor are not listed, it is co-branded and co-developed with Garmin.

The sensor is fitted to the entire Scalpel HT range of bikes, from the most affordable to the most expensive.

2022 Cannondale Scalpel HT geometry

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

This is a lightweight XC hardtail with modern geometry.
Cannondale

The range of Scalpels in four sizes (small to extra large) all feature geometry that wouldn’t have felt out of place on a more hardcore, trail-focused hardtail just a few years ago.

However, only the more expensive Hi-MOD 1 bike is factory-fitted with the 110mm travel fork. The extra stroke lifts the front end and pushes the XC hardtail geometry into new territory with a 66.5-degree head tube angle.

The range figures for the Hi-MOD bike range from 404mm to 465mm and are slightly shorter than the 100mm bike thanks to the longer travel fork. On models with 100mm travel, reach values ​​start at 410mm and go up to 470mm.

Chainstay length for both travel versions increases as the size of the bike increases, dubbed Proportional Response by Cannondale. Base lengths start at 430mm and go up to 445mm, increasing in 5mm increments with each increase in size.

Actual and actual seat tube angles are kept virtually the same across all sizes and travels of the Scalpel, with the longer-travel bike having looser angles, again thanks to the increased front height . The numbers hover around the 74.5 degree mark.

2022 Cannondale Scalpel HT models, specifications and prices

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

The Scalpel HT should be well suited for high-speed driving.
Cannondale

The latest Scalpel HT comes in four different versions, with the top performing bike using the Hi-MOD carbon fiber frame, rather than the standard Cannondale Carbon seen on the remaining models.

Topping the line is the Scalpel HT Hi-MOD 1, fitted with the Lefty Ocho 120 carbon fork 110mm travel with 50mm offset, Shimano M9100 12-speed drivetrain and Cannondale trim kit. in ultra-light carbon fiber. It costs £ 6,200 / $ 5,000 / € 6,999.

The worst performing Scalpel HT Carbon 4 features a 100mm RockShox SID SL travel fork with 44mm offset, a Shimano Deore M6100 12-speed drivetrain and a host of Cannondale aluminum parts to complement construction, priced at £ 2,600 / $ 2,200 / € 2,499.

2022 Scalpel Cannondale HT Hi-MOD 1

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

2022 Cannondale Scalpel HT Hi-MOD 1.
Cannondale

  • Framework: Cannondale Hi-MOD Carbon
  • Fork: Lefty Ocho 120 Carbon, 110 mm travel
  • Transmission: Shimano XTR M9100
  • Cranks: HollowGram BB30a, 34t
  • Wheels / tires: HollowGram 25 rims on HollowGram / Schwalbe Racing Ray EVO SnakeSkin Addix Speedgrip TR 29 × 2.25 inch (f), Schwalbe Racing Ralph EVO SnakeSkin Addix Speed ​​TR 29 × 2.25 inch (r) hubs
  • Brakes: Shimano XT 160 mm discs
  • Bar / stem: Apartment Cannondale 1 / Cannondale 1
  • Seat post / saddle: Rails C1 Carbon / Prologo Dimension NDR Tirox
  • Price: £ 6,200 / $ 5,000 / € 6,999

2022 Cannondale Scalpel HT Carbon 2

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

2022 Cannondale Scalpel HT Carbon 2.
Cannondale

  • Framework: Cannondale Carbon
  • Fork: Lefty Ocho, 100mm travel
  • Transmission: Shimano XT M8100
  • Cranks: HollowGram BB30a, 34t
  • Wheels / tires: Stan’s NoTubes Crest MK4 on Lefty / Shimano / Schwalbe Racing Ray EVO SnakeSkin Addix Speedgrip TR 29 × 2.25 inch (f), Schwalbe Racing Ralph EVO SnakeSkin 29 × 2.25 inch hubs
  • Brakes: Shimano XT 160 mm discs
  • Bar / stem: Cannondale 1 Apartment / Cannondale 3
  • Seat post / saddle: Rails C1 Carbon / Prologo Dimension NDR Tirox
  • Price: £ 3,400 / $ 4,000 / € 4,499

2022 Cannondale Scalpel HT Carbon 3

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

2022 Cannondale Scalpel HT Carbon 3.
Cannondale

  • Framework: Cannondale Carbon
  • Fork: RockShox SID SL Select + RL, 100mm travel
  • Transmission: Shimano SLX M7100
  • Cranks: Canondale 1 BB30a, 34t
  • Wheels / tires: Stan’s NoTubes Crest MK4 on Shimano / Schwalbe Racing Ray EVO TwinSkin TR 29 × 2.25 ” (f) hubs, Schwalbe Racing Ralph EVO SnakeSkin Addix, TR 29 × 2.25 ”
  • Brakes: Shimano M6100 160 mm discs
  • Bar / stem: Cannondale 2 Apartment / Cannondale 2
  • Seat post / saddle: C2 Carbon / Fabric Scoop Shallow Elite
  • Price: £ 2,600 / $ 3,000 / € 3,299

2022 Scalpel Cannondale HT Carbon 4

2022 Cannondale Scalpel HT Cross Country Hardtail Mountainbike

2022 Cannondale Scalpel HT Carbon 4.
Cannondale

  • Framework: Cannondale Carbon
  • Fork: RockShox SID SL, 100mm travel
  • Transmission: Shimano Deore M6100
  • Cranks: Shimano M5121, 30t
  • Wheels / tires: WTB STX i23 on Shimano / Stan’s NoTubes Crest MK4 hubs on Shimano / Schwalbe Racing Ray EVO TwinSkin TR 29 × 2.25 inch (f) hubs, Schwalbe Racing Ralph EVO SnakeSkin Addix, TR 29 × 2.25 inch
  • Brakes: Shimano MT501 160mm discs
  • Bar / stem: Cannondale 2 Apartment / Cannondale 2
  • Seat post / saddle: C3 Alloy / Fabric Scoop Shallow Sport
  • Price: £ 2,600 / $ 2,200 / € 2,499

[ad_2]

Leave A Reply

Your email address will not be published.